Slightly behind schedule on the blog, but fortunately the same doesn't apply for the build!
I'll start off with one of the issues we had! So far throughout the build we've moved a lot of soil, neatly tumped down the bottom of the garden... or so I thought. We've put Gabions filled with stone to retain the soil, which isn't a problem however a prolonged day of rain; and more rain on Thursday caused the soil banked near the hedge to shift and the consequence was the hedge collapsing... into the road! This could have been a big problem, but after a bit of good patch up work from Mum and my brother (who were the first responders in this case) to tie the hedge back, we trimmed it back temporarily and MGL managed to get Pete back on site (Pete helped with the digger work on the foundations) and he moved the soil away from the road edge of the plot. Disaster averted, thankfully.
Now to look at some more positive activity! Last week saw the completion of the block and brick work to damp proof course level. This means we are officially out of the ground in just under two weeks!
We've got the concrete slab being poured on Wednesday this week, which means we are ahead of schedule and managed to do so even with a few days of poor weather (sorry about that Mark)! Pretty much all of our base works products have been ordered through Travis Perkins, Leominster. I don't know if all depots are the same but they have been knowledgeable, very helpful throughout and everything has been delivered on time, when they said, with little fuss. I can't stress enough the importance of this in assisting with getting the base done quickly.
Once the concrete is poured we'll be ready for Border Oak with the frame! We've ordered the roof windows from Travis Perkins and they will store them for us until we need them. We are a bit ahead of where we thought we'd be at this stage, because the frame isn't due to go through the Border Oak workshops for another couple of weeks. I'll keep you posted on this.
After the rain, I've bitten the bullet and purchased myself some rigger boots - I've always fancied a pair and now I have a legitimate reason for them and at least I look the part!
This weekend saw Fliss and I visit Grand Designs Live at the NEC. with the aim of finding inspiration for some of the finishes and also potential suppliers. In a word PACKED. Lots of shuffling to move through the crowds, but was great to find some inspiration, some affordable some well out of our budget.
A couple of neat products we found were, pocket doors for the upstairs bathroom (I'll re-visit this at a later date), some interesting stone finishing products and there was flooring options galore. We're also seriously considering a Heat Recovery Ventilation System. It isn't something we have budgeted for, but if was can make the numbers work it might not be as expensive as we first thought. For those that don't know what this is, basically it is a way of keeping fresh air in the building. It does this by extracting air and moisture from the inside of the house, and replacing it fresh air, that is not cold because of the way the extraction system works (using an energy cell). There are lots of variations of the system (this is a very simple description). You'd need to ask experts in these systems for more detailed information. We have a few things to work through before deciding whether it will work for us (like where to put the main unit) and how to go about it, but it is something we are seriously thinking about.
We also took the opportunity to chat with one of the #AskAnExpert team and we're mulling over what to do with the information provided.
Now did I mention a tape measure? We'll if you've read other blog entries, you may think I have an obsession for tape measures... I would argue that it is simply an essential building tool. Yes I did buy another tape, but this one was different... it is a double sided 2 in 1 gap tape! What more could you want when measuring a gap!
Thanks for reading, Tim
Follow us on Twitter www.twitter.com/fortyacresbuild
PS I've added a subscribe section on the top right of this blog to make it easier to follow the build.
I'll start off with one of the issues we had! So far throughout the build we've moved a lot of soil, neatly tumped down the bottom of the garden... or so I thought. We've put Gabions filled with stone to retain the soil, which isn't a problem however a prolonged day of rain; and more rain on Thursday caused the soil banked near the hedge to shift and the consequence was the hedge collapsing... into the road! This could have been a big problem, but after a bit of good patch up work from Mum and my brother (who were the first responders in this case) to tie the hedge back, we trimmed it back temporarily and MGL managed to get Pete back on site (Pete helped with the digger work on the foundations) and he moved the soil away from the road edge of the plot. Disaster averted, thankfully.
Now to look at some more positive activity! Last week saw the completion of the block and brick work to damp proof course level. This means we are officially out of the ground in just under two weeks!
Base with damp proof membrane ready for the concrete slab
We've got the concrete slab being poured on Wednesday this week, which means we are ahead of schedule and managed to do so even with a few days of poor weather (sorry about that Mark)! Pretty much all of our base works products have been ordered through Travis Perkins, Leominster. I don't know if all depots are the same but they have been knowledgeable, very helpful throughout and everything has been delivered on time, when they said, with little fuss. I can't stress enough the importance of this in assisting with getting the base done quickly.
Once the concrete is poured we'll be ready for Border Oak with the frame! We've ordered the roof windows from Travis Perkins and they will store them for us until we need them. We are a bit ahead of where we thought we'd be at this stage, because the frame isn't due to go through the Border Oak workshops for another couple of weeks. I'll keep you posted on this.
After the rain, I've bitten the bullet and purchased myself some rigger boots - I've always fancied a pair and now I have a legitimate reason for them and at least I look the part!
They're dirty now, honest
This weekend saw Fliss and I visit Grand Designs Live at the NEC. with the aim of finding inspiration for some of the finishes and also potential suppliers. In a word PACKED. Lots of shuffling to move through the crowds, but was great to find some inspiration, some affordable some well out of our budget.
A couple of neat products we found were, pocket doors for the upstairs bathroom (I'll re-visit this at a later date), some interesting stone finishing products and there was flooring options galore. We're also seriously considering a Heat Recovery Ventilation System. It isn't something we have budgeted for, but if was can make the numbers work it might not be as expensive as we first thought. For those that don't know what this is, basically it is a way of keeping fresh air in the building. It does this by extracting air and moisture from the inside of the house, and replacing it fresh air, that is not cold because of the way the extraction system works (using an energy cell). There are lots of variations of the system (this is a very simple description). You'd need to ask experts in these systems for more detailed information. We have a few things to work through before deciding whether it will work for us (like where to put the main unit) and how to go about it, but it is something we are seriously thinking about.
We also took the opportunity to chat with one of the #AskAnExpert team and we're mulling over what to do with the information provided.
Now did I mention a tape measure? We'll if you've read other blog entries, you may think I have an obsession for tape measures... I would argue that it is simply an essential building tool. Yes I did buy another tape, but this one was different... it is a double sided 2 in 1 gap tape! What more could you want when measuring a gap!
Thanks for reading, Tim
Follow us on Twitter www.twitter.com/fortyacresbuild
PS I've added a subscribe section on the top right of this blog to make it easier to follow the build.
No comments:
Post a Comment